News and Stories


image image       




Contact Information:

Terex Cranes Global Marketing

Press & Public Relations




Maxim Crane employs 11 Terex tower cranes for city centre project

Luffing jib, hammerhead and flat top crane models intricately positioned for construction


Miami, U.S.A, March 19th, 2015 – Miami’s coastline and financial district are being transformed by Swire Properties’ latest majestic creation, Brickell City Centre. The $1.05 billion mixed-use development includes a number of high-rise buildings skirting the Miami River just off the coast.

This 9.1-acre (3.7-hectare) city-within-a-city project includes 5.4 million ft2 (501,676 m2) of office, residential, hotel, retail and entertainment space, giving a new meaning to urban living. It is estimated that the project will have a $1 billion overall economic impact to the city, creating 3,700 direct jobs and 2,500 indirect jobs after construction is complete. Equally as important for the construction industry, the 3.5-year project – spanning from July 2012 to the end of 2015 – will add 1,700 construction jobs on average each year.

The Americaribe/Moriarty Joint Venture is tasked as the general contractor to bring Swire Properties vision to reality. For planning the intricate lifting requirements and for constructing the shopping center, two office space towers, two condominium towers, hotels and apartments, the company trusted the experience and expertise offered by one of the nation’s largest lift equipment companies, Bridgeville, Pa.-based Maxim Crane Works, L.P.

Construction of the structures within the confined City Centre’s space is not easy, and the lifting equipment involved requires careful planning by Maxim Crane. “Jobsite conditions are such that several different types of tower cranes are necessary to accommodate the project’s needs for coverage, while also fitting as many cranes into the project as possible,” says Matt Hyden, V.P. of the Tower Division for Maxim Crane.

Maxim Crane’s team works closely with Americaribe/Moriarty JV to provide a safe and economical solution for the project. “Our local sales team has the experience and expertise to partner with the customer to ensure that all of the coordination needed to move in, erect, climb and operate these cranes is perfectly orchestrated to meet the demands of such a critical path project,” adds Frank Fioravanti, V.P. of the Florida Region for Maxim Crane.

Mixed-Use Cranes

Final lift plans require 11 tower cranes for the project, all of them Terex. The strategy employed a mix of Terex® hammerhead, flat top and luffing jib designs to safely handle all of the lifting needs at City Centre. “Maxim Crane and Terex Crane’s history in the market and reputation for reliability and service are critical in the crane selection for the project,” explains Hyden. “Due to the confined space and adjacent structures, we have specific needs where the different tower crane designs are required to meet the needs of the project, all of which are able to be met by Terex Cranes.”

With a project like City Centre, tower cranes fill a crucial role in the construction of the high-rise structures, as they provide the majority of the hoisting. Everything from tools, concrete form work and rebar to structural steel, equipment and concrete are lifted by the cranes. Careful planning is required up front to make certain that every square inch of the project site is covered by a tower crane for construction crews. “We have up to 700 ft (213.4 m) under hook height and up to 244 ft (74.4 m) hook reach with the tower cranes,” mentions Hyden.

Many of the cranes fit in the 300-400 meter-ton market range, and each tower crane design was selected to meet specific criteria. Since this is a downtown project, space is at a premium. “We need luffing jibs for work close to adjacent structures and to meet weathervaning restrictions,” comments Fioravanti.

The Terex luffing jib line includes 8 different model configurations with lift capacity classes ranging from 11 to 72.5 US tons (10 to 66 tonnes) and maximum jib lengths from 164 to 246.1 ft (50 to 75 m). Offering a working range of 15° to 85°, Terex luffing jib cranes increase flexibility by giving the lifting crew a number of different working radii, while conserving space on the job.

With the City Centre project requiring so many crane configurations, it’s inevitable that interference would be a concern. “There are as many as five interfering cranes working together in certain areas of the project,” says Fioravanti, “so we used Terex flat top cranes for this part of the project.”

Flat top tower cranes are constructed without the “tops” of conventional cranes and offer lift capacities reaching 44.1 tons (40 tonnes). “Terex flat top cranes are designed specifically for jobs like City Centre,” says Terex Sales Manager Tower Cranes, Ruedi Van Coppenolle, “where space is confined or when working near airports.” Maxim Crane is using the Terex CTT561/A-20 model on this particular project, which gave them a maximum jib length of 275.6 ft (84 m).

Where space is not a concern and the need for lifting speed and power were required, Maxim Crane selected the hammerhead crane design. Providing a jib length reaching up to 262.5 ft (80 m), Terex hammerhead cranes are designed specifically for heavy lifting and placement duties on challenging jobsites like City Centre. “Our SK series includes cranes with maximum lift capacities ranging from 22 to 35.3 tons (20 to 32 tonnes),” mentions Van Coppenolle. Hyden adds, “We selected the hammerhead models for speed and capacity, and our customers and operators alike appreciate the speed and reliability of all the Terex tower cranes in use on the project.”

With the project positioned near the Atlantic Ocean coastline and constructed over 3.5-year period, Americaribe/Moriarty JV and Maxim Crane leaders had to account for and establish safety procedures in case of hurricanes making landfall. “Terex provided application engineering assistance to help develop climb sequences, tie-off points and initial freestanding configurations suitable to this job to meet hurricane wind-load ratings,” mentions Hyden.

Terex transfer masts help Maxim Crane meet the stringent wind-load ratings and gain more flexibility with regard to the initial freestanding crane configurations. The transfer mast also allowed crews to more efficiently use tower crane segments between the different tower designs. “The transfer masts allow any tower crane segment to be used with the hammerhead, flat top or luffing jib crane design, regardless of what model the segment was built for,” explains Van Coppenolle. “Crews can mix standard upper segments with heavy duty lower segments to deliver a maximum freestanding crane height of 140 ft (42.7 m), while still meeting Florida’s 146 mph (235 km/hr) wind-load standard.”

More than two-thirds of the way through City Centre’s construction cycle, Maxim Crane’s crew and 11 tower cranes are efficiently helping to construct the site’s structures. “The cranes will be on site for 16 to 24 months per crane,” says Fioravanti. “They are working, and we are not hearing anything back from the job site. No news is good news once the cranes are put to work.”



About Terex® Tower Cranes

Terex offers multiple tower crane designs to fit virtually any lifting need, including hammerhead, flat top, luffing jib and self-erecting. All models are available in a broad selection of freestanding heights and versions.

Combining over 20 of experience and the latest in Terex tower crane innovation and technology, Terex CTL luffing jib tower cranes are a popular choice among leading crane companies worldwide. Well-matched to the construction of high-rise buildings on urban jobsites, the luffing jib tower cranes are designed to work together in a wide variety of configurations efficiently and safely. The line includes 8 models with maximum lifting capacities from 11 to 72.7 US tons (10 to 66 tonnes) and maximum jib lengths from 164 to 246 ft (50 to 75 m).

Designed for use in applications ranging from residential buildings to infrastructure projects, Terex CTT flat top tower cranes are ideal for working on projects near airports or in conjunction with other flat top cranes. Well-suited for heavy lifting and placement duties in the most challenging jobsites, their modular system concept offers efficient set-up times to get working quickly. The Terex CTT tower crane range includes 11 models offering maximum lifting capacities from 5.5 to 44.1 US tons (5 to 40 tonnes) and maximum jib lengths ranging from 164 to 275.6 ft (50 to 84 meters).

Designed for easy maintenance and reliable performance for optimum uptime, the Terex SK hammerhead tower crane models offer jib lengths from 114.83 to 262.5 ft (35 to 80 m) for maximum load capacities from 22 to 35.3 US tons (20 to 32 tonnes). Their range of freestanding heights reaching up to 248.7 ft (75.8 m) makes them well-suited for lifting heavy loads on high-rise construction sites. Fully compatible with Terex CTT flat top and CTL luffing jib tower cranes, the SK series provides excellent maneuverability and load moment precision.

Terex transfer masts allow crane companies to do more with less combining Peiner and Comedil legacy brands to form a new versatile and productive tower crane system. They permit a wide range of combinations using varying tower sections to match application requirements and improve freestanding capabilities. With no need for anchoring collars, the cost-effective masts reduce assembly time. By using a combination of required components from flat top, luffing jib and hammerhead tower cranes, companies can optimize the benefits offered by Terex tower cranes. Positioned between two different towers or directly on the lower slewing unit, Terex transfer masts allow crane companies to combine Terex flat top, luffing jib and hammerhead tower segments to lower inventory requirements and improve flexibility.


About Maxim Crane Works

Maxim Crane Works specializes in the rental and sales of lift equipment, including hydraulic truck cranes, rough terrain cranes, crawler cranes, tower cranes, conventional truck cranes and boom trucks. With over 30 locations, Maxim Crane provides customers with crane rentals and crane rental services anywhere in the Continental United States.

Maxim Crane provides risk management, safety and insurance programs that are unparalleled in the industry, and its maintenance and service programs promote maximum uptime with minimal delays. With Maxim Crane’s expansive resources, each branch has the capability to provide management, rigging, engineering, transportation and outsourcing – making Maxim Crane’s product and service offerings the most comprehensive in the industry.

For more information on Maxim Crane, visit


About Terex

Terex Corporation is a lifting and material handling solutions company reporting in five business segments: Aerial Work Platforms, Construction, Cranes, Material Handling & Port Solutions and Materials Processing. Terex manufactures a broad range of equipment serving customers in various industries, including the construction, infrastructure, manufacturing, shipping, transportation, refining, energy, utility, quarrying and mining industries. Terex offers financial products and services to assist in the acquisition of Terex equipment through Terex Financial Services. Terex uses its website ( and Facebook page ( to make information available to its investors and the market.

\\terex.local\zwb.zweibrueckenuserdata\laura.basmer\Desktop\Miami Towers.JPG

<< News and Stories