Noticias e historias


image image   




Contact Information:

Terex Cranes Global Marketing

Press & Public Relations


designed to outlift any other boom truck in north america


ZWEIBRÜCKEN, October 31, 2014 – Canadian Professional Crane, Inc., (CP Crane) of Waterdown, Ontario, Canada, recently purchased a new 80 US t (72.5 t) Terex® Crossover 8000 boom truck, the first one sold in Canada. According to Aram Malek of CP Crane, the company needed a crane that could handle up to 80 US t but would also keep a small footprint and only require one operator. The Crossover 8000 boom truck met all of CP Crane’s needs.

CP Crane’s Crossover 8000 superstructure is mounted on a 2014 Freightliner 114SD chassis, configured with a 126-ft (38 m) fully powered, 4-section boom with a quick reeve boom head and a 33- (10 m) to 57-ft (17 m) offset jib. The X-pattern outrigger design on the Crossover 8000 crane eliminates the need for the front stabilizer jack. This decreases overall crane length and weight. The Terex Crossover 8000 crane is also equipped with a quick-reeving hook block featuring five sheaves to offer its maximum capacity, giving it the flexibility to handle some complex lifts. With these features, the Crossover 8000 provides CP Crane with the strongest lift capacity of any boom truck available in North America.

Thanks to the crane’s capacity and boom length,” says Mr. Malek, “CP Crane is able to take on more jobs with the new Crossover 8000. The additional capacity and the compact footprint allows us to lift massive loads in tight areas, giving us an edge over our competitors. And, having one operator on the job saves us a considerable amount of expense we would otherwise have to incur when using a crane that can handle this amount of weight.“

Other factors that weighed into CP Crane’s purchase was that the Crossover 8000 crane has minimal weight per axle and travel speeds of up to 70 mph (113 kmh), enabling the company’s crews to drive the crane directly to most work sites. CP Crane’s Crossover 8000 also carries full counterweights on board, so there is no need for a separate shipment or the headache of adding and removing the weights for transport. And, because the Crossover 8000 boom truck does not require a front stabilizer jack, CP Crane’s setup time will be considerably reduced.

The company purchased the new Crossover 8000 boom truck from Cropac Equipment Inc., a Terex Cranes distributor they have worked with before. “Cropac is a company with a reputation for carrying only quality equipment, and our work demands zero downtime and efficiency,” says Mr. Malek. “CP Cranes has always stood by Cropac and we know Terex has a reliable and durable product, which is a key to running a successful crane rental operation. In our fast-paced industry, no one can afford any downtime.”


About the Terex® Crossover 8000 boom truck

Introduced at CONEXPO-CON/AGG in March, 2014, the new Terex Crossover 8000 is an 80 US t (72.5 t) capacity class boom truck that blends truck crane and boom crane designs to offer a 360-degree load capacity that outlifts any other boom truck in North America. And, the Crossover 8000 boom truck offers almost identical load ratings throughout most lift situations, regardless if lifting from the front, rear or sides of the crane.

Designed for optimum performance over a broad range of applications including construction, road work, equipment placing and maintenance and rental services, the Crossover 8000 crane’s four-section main boom offers a 126-ft (38 m) length with a 189-ft (57.6 m) maximum tip height. Two available jib designs – fixed length 33 ft (10 m) and extendable to 57 ft (17 m) – offer 0-, 15- and 30-degree offset positions, providing easy reach when lifting over objects.

The Crossover 8000 crane boasts a unique X-pattern outrigger design that allows for enhanced all-around lift capabilities. This feature lowers the overall center of gravity and isolates the crane’s upper structure from the truck chassis, reducing chassis torsion and extending its lifetime. The X-pattern outrigger positioning also eliminates the need for the front stabilizer jack, decreasing the crane’s overall length and weight. The crane’s 3-position outrigger – minimum 6.5-ft (2.0 m), middle 19-ft, 9.3 in (5.9 m), and maximum 26-ft (7.9 m) position span – allows the Crossover 8000 boom truck to be used in confined spaces and further enhances the crane’s maneuverability.

The Crossover 8000 is the first boom truck to feature the latest Terex operator’s cab, designed to boost productivity and comfort. Moreover, an infinitely variable tilt-up operator cab of up to 18 degrees delivers improved vision of the work area.


About Canadian Professional Crane, Inc.
Canadian Professional Crane Inc. (CP Crane) based in Waterdown, Ontario, Canada, provides crane services to Southern Ontario and beyond. In order to select the appropriate equipment required to complete every job in the most economical, timely and safe manner, CP Crane offers expert personnel and machinery based only on the costumer's needs and time constraints.

The company supplies boom truck operators who operate trucks with capacities up to 80 US t and reach a height of up to 167 ft. CP Crane’s equipment is available for rental by day, week or month. CP Crane supplies customers with a certified hoisting engineer if required. CP Crane offers no minimum hourly rentals, no overtime rate charges, and no fuel surcharges for boom truck rentals which give them an edge over the competition.

CP Crane is very focused on job site safety. All equipment is inspected daily by hoisting engineers and all equipment is inspected annually by independent professional engineers to make sure they can provide the safest equipment possible. Canadian Professional Crane Inc. is renowned for excellent, timely and friendly service and has built a very positive reputation within the crane rental industry over the past decade. For more information about CP Crane, visit:

About Cropac Equipment

The Cropac name is synonymous with quality. For over 35 years, Cropac Equipment has been committed to customer service. We firmly believe it’s all about your equipment working for you. Our factory-trained technicians not only service everything we sell, but what our competitors sell, as well.

Cropac are a proud factory-authorized distributor for Terex cranes offering the complete lineup, including truck cranes, all terrain cranes, rough terrain cranes and crawler cranes.

No matter the color of your crane, boom truck, forklift, or the name on it, Cropac can supply you with OEM (original equipment manufacturer) parts. Cropac also sells used equipment. We search throughout the world for products so we can offer our customers crane solutions suiting their budgets. For a current list of equipment, new and used, click on the Cranes for Sale box. If you don’t see what you need, call us and we will find it for you.

To serve you better, we have three state-of-the-art full service facilities in Oakville, Ontario, Nisku, Alberta and Laval, Québec.

About Terex
Terex Corporation is a lifting and material handling solutions company reporting in five business segments: Aerial Work Platforms, Construction, Cranes, Material Handling & Port Solutions and Materials Processing. Terex manufactures a broad range of equipment serving customers in various industries, including the construction, infrastructure, manufacturing, shipping, transportation, refining, energy, utility, quarrying and mining industries. Terex offers financial products and services to assist in the acquisition of Terex equipment through Terex Financial Services. Terex uses its website ( and Facebook page ( to make information available to its investors and the market.




<< Noticias e historias