Terex Cranes Global Marketing
Press & Public Relations
Rising to the Challenge
High-Capacity Terex® Superlift 3800 Crawler Crane Demonstrates Its Productivity
While Working on Lima Convention Center Project
LIMA, Peru, July 7th, 2015 - Construction work for the new Lima Convention Center is progressing full speed ahead at the San Borja District of Peru’s capital. The project, which represents an investment of 173 million dollars and has a scheduled timeframe of only 15 months, will give rise to a building of tremendous size and significance: The venue will be hosting the Annual Meetings of the Board of Governors of the World Bank (WB) and International Monetary Fund (IMF) in October 2015.
The Lima Convention Center spans an area of 85,441 m² (119,683-ft.²) in a predominantly residential district. The building, which rises 10 floors above ground level, also features four underground parking levels that can accommodate more than 900 vehicles. Eight floors of conference rooms offer 14,925 m² (160,651 ft.²) of meeting space with a total capacity of 9,950 people. The top floor features an impressive single exhibition room covering 5,250 m² (56,510 ft.²).
Peruvian Housing Minister, Milton Von Hess, told Peru This Week, "That puts (Peru) at the international forefront of capacity to hold international events."
Superlift meets super structure
A project of this magnitude, of this tight timeframe requires a versatile crane to assist the trades with building the structure. Lima-based heavy lifting contractor Grúas y Maniobras S.A.C. had the right crane for the job. “We went with the Terex Superlift 3800 lattice boom crawler crane for this project,” comments General Manager José Arturo Sánchez Torres. “It’s versatile and mobile, features cutting-edge technology, and is designed to handle lifts quickly and with utmost precision, which is exactly what we needed for a demanding and complex project like this.”
The 650-tonne (716 US-t) Superlift 3800 crane, which Grúas y Maniobras recently acquired, is the model with the highest lifting capacity in the company’s fleet, as well as the largest crawler crane currently working in Peru’s capital. The heavy lifting company has a total of 12 all-terrain, rough-terrain, and crawler cranes, all belonging to the Terex brand. “Terex Cranes provides state-of-the-art technology, quality products, and an excellent price-performance ratio with all its cranes,” Sánchez adds. “Not to mention we get excellent support and advice from Terex and from Ferreyros, our Terex crane distributor.”
In November 2014, Grúas y Maniobras prepared its Superlift 3800 crawler crane for the 25-kilometer (15.5 mi) journey from the company’s headquarters in the San Juan de Lurigancho District to the east side of Lima, where the future Convention Center will be located. Transporting the enormous crane, as well as its boom sections, counterweights, and fixed jib, took a total of 35 transportation vehicles – a relatively small number considering the equipment’s enormous size.
“The way the Superlift 3800 is designed makes it possible for users all over the world to get it ready to go quickly and efficiently, all thanks to how its smaller boom sections can be nested inside larger ones and to the fact that none of its components has a width of more than 3 m (9.8 ft),” comments Ferreyros representative Carlos Ojeda. “Once at a work site, features such as its quick-connection system make it possible to install and remove the superstructure in less than 15 minutes, speeding up the unit’s setup.”
The components’ relatively narrow transportation width proved to be an enormous advantage for the project: “We set up the crane in a residential area right in the middle of the city, which meant there was very little space to maneuver in when getting the machine to the site,” explains Sánchez. “However, the crane’s design made getting to the site and setting up the machine there extremely easy.”
Once the crane components made it to the convention center construction site, Grúas y Maniobras’ crew of 12 had the Superlift 3800 crane assembled and ready for work in only four days.
Dominating the skyline
Among the lifting equipment at the project site, the Terex Superlift 3800 crawler crane dominated the landscape as it towered over all the other cranes.
For the heavy lifting, it was equipped with 96 m (315 ft.) of main boom, a 12-m (39.4-ft.) light fixed fly jib and Superlift structure to help boost lift capacities when working at maximum radius. Full counterweight of 165 tonnes (182 US t) was positioned on the variable-position Superlift tray and another 50 tonnes (55 US t) was placed on the super structure.
Grúas y Maniobras used the crawler crane to lift and install the building’s preassembled beams and girders. "The segments weighed up to 40 tonnes (44 US t) each, and we worked the crane at a maximum radius of 90 m (295 ft.) and a height reaching 38 to 40 m (125 to 131 ft.)," mentions Torres. This was well within the Superlift 3800 crane's capacity of 58 tonnes (64 US t) when working at this radius.
Operating a crane of this size in a residential area can be challenging, but the crew and Superlift 3800 crawler crane were up to the task. The obstacles in the way of the lifts included banks, a government building, and heavy vehicle and pedestrian traffic. “However, the crane features extremely precise controls and is easy to operate and maneuver, so performing the actual lifts ended up being quite easy,” Sánchez adds.
Depending on the phase of construction, crews performed an average of 12 heavy hoists every day with the crawler crane. Working on a large structure spanning more than 8.5 hectares made it necessary to move the crane a number of times, but, according to Sánchez, the fact that they were able to use the crane with a very large radius made a significant contribution to the lifting operations’ efficiency. “Thanks to the Superlift 3800’s capacity, we needed to move it fewer times, and the time saved as a result meant we were able to cut down on man-hours and other costs,” he continues.
The crane’s ability to move by itself using its crawler system was another point in its favor when it came to the project’s requirements. This is reflected in the fact that the crane has moved the equivalent of a total linear distance of 3,000 meters (1.86 mi) since its arrival at the construction site.
The unit’s extraordinary performance during the Lima Convention Center project means that Grúas y Maniobras has found a crane that meets their capacity, precision, mobility, and maneuverability needs. “We’re definitely planning to use our Terex Superlift 3800 crawler crane for large-scale projects throughout Peru in the coming years,” Sánchez concludes.
For more information on the crane please follow the link: Superlift 3800
About Grúas y Maniobras S.A.C.
Founded in Lima, Peru in 2003, Grúas y Maniobras S.A.C. specializes in heavy load handling and assembly services, as well as in special transportation projects. The company does work for customers from a broad range of industries, including the energy, industrial, infrastructure, and port sectors. Focusing on development and innovation, Grúas y Maniobras offers personalized service to customers and employs a full range of Terex crane equipment to overcome the most challenging lift projects. For more information on Grúas y Maniobras, visit: www.gruasymaniobrasperu.com.
Terex Corporation is a lifting and material handling solutions company reporting in five business segments: Aerial Work Platforms, Construction, Cranes, Material Handling & Port Solutions and Materials Processing. Terex manufactures a broad range of equipment serving customers in various industries, including the construction, infrastructure, manufacturing, shipping, transportation, refining, energy, utility, quarrying and mining industries. Terex offers financial products and services to assist in the acquisition of Terex equipment through Terex Financial Services. Terex uses its website (www.terex.com) and Facebook page (www.facebook.com/TerexCorporation) to make information available to its investors and the market.
Ferreyros is Peru’s leading supplier of capital goods and specialized services. A member of the Ferreycorp conglomerate, which has 92 years of history behind it, the company employs over 3,600 people and has over 60 locations in the country. Its work focuses on meeting the needs of the industries that are currently driving Peru’s development, including the mining, construction, industrial, energy, fishing, and agricultural sectors. For more information, please visit www.ferreyros.com.pe.
© 2018 Terex Corporation. Todos los derechos reservados.