Quote

Schedule
Service
  • Home
  • Bullet, .76, TC10 Series

Bullet, .76, TC10 Series

c10bulletseries





c10bulletseries2
Send Message Find Service Order Parts

We're sorry there are no specifications for this product at this time.

Part number

Code

Application

TA001375

RB1LRSN KM

Small diameter tip reduces vibration during concrete cutting.

Long retainer.

TA001371

RB3LR KM

Fractured and non-fractured materials, frozen soils, and abrasive materials. Long retainer.

TA001379

RB3SR KM

Fractured and non-fractured materials, frozen soils, and abrasive materials. Short retainer.

T29912

RL08/C3LR KM

Cutting concrete and other tough cutting applications.

Long retainer.

T29913

RL09/C3SR94 KM

For cutting concrete and other tough cutting applications.

Short retainer.

T68888

TX1HDLR KM

For drilling concrete and rock cutting. Double-angle tip provides maximum impact strength. Long retainer.

T29911

TX1HDSR KM

For drilling concrete and rock cutting. Double-angle tip provides maximum impact strength. Short retainer.

TA001376

RB1SR-SN KM

Fractured and non-fractured materials, frozen soils, and abrasive materials. Short retainer.

65342401

RL09 TX

For cutting concrete and other tough cutting applications. Ideal use for Spiral BTA series.

T70795

RL11 KM

For cutting soft to medium-hard materials with good penetration. Dimpled retainer for increased holding power in grooved blocks.

65349085

RC1LR-SN TX

Small diameter tip reduces vibration during concrete cutting. Long retainer.

65349086

RC1SR-SN TX

Fractured and non-fractured materials, frozen soils, and abrasive materials. Short retainer.

TA000897

C1HDSR RL10 KM

For drilling concrete and rock cutting. Double-angle tip provides maximum impact strength. Short retainer.

65350265

RC1SR-SN TX

Fractured and non-fractured materials, frozen soils, and abrasive materials Short retainer.

TA001455

RS16 TX

For drilling concrete and rock cutting. Double-angle tip provides maximum impact strength. Short retainer.

T29941

C10 KM

45° mounting surface with a narrower face than C10HD style. Welded with 7018 or 8018 low-hydrogen rod.

T29942

C10HD KM

45° mounting surface. Extra-heavy-duty design. Welded with 7018 or 8018 low-hydrogen rod.

TA001404

RC10F TX

For buckets, barrels, and special applications. Welded with 7018 or 8018 low-hydrogen rod.

65350264

RC10FS TX

For buckets, barrels, and special applications. Welded with 7018 or 8018 low-hydrogen rod.

Quote Request

Need a quote? Fill out the form below and we will get back to you!
By checking this box, you are consenting to receive communications from Terex Utilities Inc.. You can modify your selection or unsubscribe at any time by visiting the email preference center.