Sign Up



Thank you for visiting our news page. You can access our latest press releases via the list below. If you are a journalist and would like to sign up to our distribution list or have any further questions, please contact us at mktg.cranes@terex.com or use the feedback form in the Contact section of the Website.

Terex tower cranes bring a touch of class to the waterfront

ZWEIBRÜCKEN, Germany – April 20, 2017 – It’s the crown jewel of the waterfront, offering multimillion dollar views of Lake Ontario. The CDN$ 210 million Bridgewater Residences on the Lake currently under construction in Burlington, Ontario, brings luxurious mixed-use living to this midsized city of just over 175,000 residents.

Built on less than two acres (0.81 hectares), the complex will feature three buildings consisting of luxury condos, hotel, shops and restaurants. Permanent residents will dwell in the landmark 22-story structure and secondary 7-story building, while the development’s 8.5-story final structure will include a four-star hotel, restaurants and retail outlets.

The nearly three-year project will require multiple contractors working together to finish all phases of construction. MTN Forming, Inc. of Bolton, Ontario, is tasked with completing structural formwork. Throughout the project, a variety of cranes will be employed to erect the buildings. However, a majority of the day-to-day lifting will be left to two cranes towering over the worksite for approximately two years. 

Complete Coverage

On the Bridgewater project site, tower cranes fill the critical link between the ground and the multistory structures. They lift a wide variety of the construction materials, ranging from tools, concrete form work and rebar to structural steel, equipment and concrete. Careful planning for the number, type, height, jib length and capacity of the cranes must be considered, so the entire project site is covered where needed.

MTN Forming relied on the expertise of Cropac Equipment Company and C&C Crane Services of Oakville, Ontario, to supply the right type of tower crane equipment, strategically positioned to efficiently serve all the company’s lifting needs. “We had just under two acres to cover, and we had to lift a variety of materials, including precast steel reinforced with core slab,” mentions Kevin Carey, Owner of C&C Crane Services. “The heaviest planned lift was 20,000 lb (9,1 tonnes) at a 164-ft (50,0-m) radius.”

In addition to what was lifted, the crane providers also had to consider ambient factors for selecting the best type of cranes for the job. “While being on the lake provides spectacular views for residents, we had to account for the high lakeside winds, lake-affect snow and extreme cold for the project,” says Joel Hunt, sales representative for Cropac Equipment, Inc. “Freestanding heights came into play for the project to reduce set-up time and cost, and we chose the cranes that gave us the highest freestanding height capability.”

When considering all factors – reach, capacity, freestanding height and reliability – Cropac and C&C Crane selected a combination of two Terex hammerhead tower crane models, the Terex® SK 315 and SK 415. The SK 315 crane offers an 8.8- to 17.6-US ton (8- to 16-tonne) capacity, while the larger SK 415 crane provides a maximum lift capacity of 22 US tons (20 tonnes). “The SK 415 gives us the lift capacity of 20,503 lb (9,3 tonnes) at the 164-ft (50,0-m) radius we needed on this project,” says Carey.

Cropac delivered the two cranes to the jobsite in September of 2016, and a crew of six workers from C&C Crane and Total Crane Rental, Bolton, Ontario, erected the two units on-site. To assist in tower assembly, crew members used a Terex® AC 250-1 all terrain crane. The 300-US ton (250-tonne) capacity class mobile crane features a long 229.7-ft (70-m) main boom length, which allowed crew members to quickly install the tower and jib sections for both cranes.

Each of the heavy duty tower sections for both cranes measured 7.8 ft wide by 8 ft high by 19.5 ft long (2,4 m by 2,4 m by 5,9 m). The shorter SK 315 crane was built with 9 tower sections under the 131.3-ft (40-m) long jib for a total freestanding height of 178.8 ft (54.5 m). For the first phase of building construction, the SK 415 crane was built with 11 tower segments to a height of 214.9 ft (65.5 m) to clear the SK 315 crane when working at radius, and it included a 164-ft (50,0-m) jib.

“Due to the sturdy construction of the tower segments,” says Hunt, “we were able to maximize freestanding height at the beginning of the construction cycle to expedite initial crane set-up.” Carey adds, “Since the cranes didn’t have to be tied back, the crew had each crane erected and working within an 8-hour workday, which saved time on the job.”

As work advances on the 22-story structure, another 5 tower sections with tie-back to the structure will be added to the SK 415 crane for a total hook height of 312.4 ft (95.2 m). “C&C Crane did an excellent job in planning the best placement of each crane to optimize efficiency for covering the entire work area with the two cranes.

Work on the $210 million complex is quickly progressing with the formwork shell beginning to reach toward the sky. The two Terex tower cranes are proving their worth, working in all kinds of weather conditions – sun, rain and snow – to help make sure workers have the tools they need to keep on schedule. We selected these cranes because of their reliability, low-maintenance history and service,” comments Carey. “Both the SK 315 and SK 415 have excellent proven track records in all aspects, especially lifting performance and operator satisfaction.” 

About Cropac Equipment

With a professional sales team possessing in-depth industry knowledge and a capacity for listening to customer needs, Cropac has been equally committed to its customers and quality service since operations began in 1977. Cropac is a proud, factory-authorized distributor for Terex and Demag crane equipment, which includes a complete line of hydraulic truck cranes, all terrain cranes, rough terrain cranes, crawler cranes, boom trucks and tower cranes.

For more about Cropac Equipment follow this link: www.cropac.com.

About Terex

Terex Corporation is a global manufacturer of lifting and material processing products and services delivering lifecycle solutions that maximize customer return on investment. Major Terex brands include Terex, Genie, Powerscreen and Demag. Terex solutions serve a broad range of industries, including construction, infrastructure, manufacturing, shipping, transportation, refining, energy, utilities, quarrying and mining. Terex offers financial products and services to assist in the acquisition of Terex equipment through Terex Financial Services. More information about Terex is available on its website: www.Terex.com, and on its LinkedIn page -- www.linkedin.com/company/terex and Facebook page -- www.facebook.com/TerexCorporation.


Press Release Archive

 2023  2022