C-1540

Cone Crusher

The fuel efficient direct drive Finlay® C-1540 Cone Crusher is the optimum machine for medium sized producers and contract crushing operators. This efficient and productive machine features the proven Finlay® 1000 cone crusher that is choke fed with integrated level sensor, automatic tramp relief and hydraulic closed side setting (CSS) adjustment.

The large hopper/feeder has automated metal detection and a purge system to protect the cone and reduce downtime by removing metal contaminants via the purge chute. Additional benefits include, rapid set up time, ease of maintenance, high reduction ratio, high output capacity and advanced electronic control system.

Key Features:

Fuel efficient direct drive transmission via a clutch.
Hydraulic Tramp Relief System with automatic reset protects the chamber and minimises downtime.
Metal detection system on feed belt with ‘auto-stop’ protects the cone from tramp metal and the purge system removes contaminants from the machine.
Advanced load sensing auxiliary hydraulics maximizes plant efficiency.

Request a Quote

Specification	Value
Net Engine Power: Tier 3 / Stage IIIA	Tier 3 - Cat 350hp \| Tier 4F/ Stage IV - Scania 350hp / Tier 3 - CAT 261kW \| Tier 4F/ Stage IV - Scania 257kW
Cone Head Diameter	40'' / 1000mm
Transport Weight	73,524lbs / 33,350kg
Transport Dimensions	Height 11' 4'' \| Width 9' \| Length 51' / Height 3.45m \| Width 2.75m \| Length 15.55m
Working Dimensions	Height 14' 3'' \| Width 12' 9'' \| Length 48' 11'' / Height 4.35m \| Width 3.9m \| Length 14.9m

Finlay-C1540-Cone-Crusher

REMOTE PLANT MAXIMISATION.

That's what Terex Finlays’ T-Link telematics system is all about.

T-Link telematics system is the optimum tool to connect you remotely to your Terex Finlay equipment.

At any given time you can see the exact location and status of your crushers and screeners.

But even better, this information also shows you precisely what areas you can improve in order to remotely optimise your profitability without needing to be standing beside your machine.

Activating T-Link on your Terex Finlay machine couldn't be simpler. Simply send an email to: finlay.tlink@terex.com and quote the serial number of your machine and we will activate the account for your machine and set you up to receive your 'Weekly Digest' report.

T-Link has been fitted to all Terex Finlay crushers* since 1st January 2016 and screeners* from 1st January 2017 (*machines fitted with electronic engine).