WASHING & CLASSIFYING
Highly comprehensive range of dewatering options for fine materials including screw dewaterers, bucket wheels, and hydrocyclone technologies, all proven on a global basis. Unique ability to offer off-the-shelf ready-made products or to design complete bespoke solutions.
The Terex FM Compact™ range are static sand washing and classification units designed to be both cost and energy efficient on a single compact chassis. The range utilises centrifugal force within the hydrocyclone(s) to remove clay, silt and slime from sand to bring it into the desired specification. The range combines a collection tank, centrifugal slurry pump(s), hydrocyclone(s) and a dewatering screen to produce up to 2 clean sands.
KEY FEATURES
- Underflow rubber lined slurry pump(s)
- Two rubber lined hydrocyclone(s)
- Self regulating cyclone tank
- High frequency dewatering screen fitted with polyurethane modular mats
- Maximum recovery of material above 75μm (200 mesh)
The Terex® T 150 is a mobile bucket wheel dewaterer complete with fines retention screw, twin bucket wheel designed units for the removal of clays, silts and slimes to produce up to 2 grades of sand.
The T 150 is designed to operate with maximum versatility and can support different requirements such as maximum retention of fines or maximum disposal of fines.
The T 150 can be driven hydraulically from the M Range or from its own optional electric power pack.
KEY FEATURES
- Can recover 1 or 2 grades of sand from wet feed or bolt-on boiler box option for direct dry feed
- High capacity variable speed twin bucket wheel providing increased drainage time for a drier product
- Deep fluted variable speed fines screw provides excellent fines recovery
- Anti-turbulence inlet boxes and weir discharge system allows consistently calm settling conditions
Terex Washing Systems offer a range of dewatering screens. Their rugged construction is designed to combat a range of applications.
Whilst primarily applied for dewatering with retained fines they are capable of being used in a wide range of applications.
The screen incorporates a 45° sloping back deck section, fitted with slotted apertures across the direction of flow. The main deck of the screen slopes upwards at 5° vibration is produced by two exciter motors operating at 980rpm.
KEY FEATURES
- Dewatering screen, catchbox and chutes combined onto a single frame
- Exceptional dewatering performance
- Modular screen decks
- Side protection liners
- Rubber lined discharge chute
The Terex® Fines Materials Washers are specifically engineered to provide the highest quality sand production through efficient washing, classification and dewatering. The range consists of 3 models, SW100, SW 200 and the FMW 5434. SW 100 Sandscrew is a single screw fine material washer/classifier/dewaterer. The recommended maximum material size is 3/8” (10mm). The approximate capacity of the SW 100 Sandscrew is 50-100 TPH. The Terex SW 200 is a twin screw fine material washer/ classifier/dewaterer. The recommended maximum material size is 3/8” (10mm). The approximate capacity of the SW 200 Sandscrew is 100-200 TPH. The FMW 5434 provides unmatched performance, serviceability and longevity.
KEY FEATURES
- Heavy duty single or twin dewatering screws (36” x 25”) for high capacity fines recovery.
- Robust easy to assemble steel construction
- Independent electric drive on each screw for maximum torque under load
- All electric plant which can easily integrate with other Terex equipment
- Low maintenance & simple operation
Terex washing systems offer a range of sand screw options to fit your needs. The screens range in size from 5’ x 16’ to 6 ’x 20’, and are teamed with single or twin dewatering screws. The screens are outfitted with strategically
placed nozzles to scrub materials clean.
High capacity dewatering screws deliver the fine aggregates while chutes and cross conveyors deliver the sized products. The portable chassis design is easy to transport to the desired site and easy to
set up.
KEY FEATURES
- Tripled deck inclined screen produces 3 grades of washed aggregate and 1 grade of sand
- Each spraybar has individual flow valves provided for complete water control
- Heavy duty single or twin dewatering screws (36” x 25”) for high capacity fines recovery.
- Robust I-beam construction chassis with double or triple axle suspension allowing for easy transportation and quick set-up